The
water jet scrubs the air of all dust particles.
Internal
surfaces are continuously flushed to prevent build-up.
Polyductor
will draw polymer up to 15 feet vertically and 30 feet
horizontally.
CAPACITIES:
Dilution
Water Flow: 10, 20, 40, 80 GPM.
Polymer
Feed Capacity: up to 1.5 lbs/min.
Water
pressure range: 40 to 100 psig.
ROTATING
DISC COMPONENT
The
disc is continuously vacuumed clean to prevent build-up.
The
polymer flow is steady. It does not pulsate as with screw
feeders.
All
components are easy to access. The feeder does not need
to be dis-assembled if it ever needs to be cleaned.
Sensors
monitor polymer levels on the disc.
The
polymer flow rate and the amount fed per batch are easy
to change.
The
feeder is totally enclosed.
A
clear door on the enclosure allows the operator to see
the feeder.
An
air dryer keeps the humidity low in the feeder enclosure
and the hopper.
Standard
hopper capacity is 2.7 cu. ft. ( 76 L. ). Other are available.
Standard
feeder ranges are: 3, 6, 12 lbs/min. Other are available.
The
modular design can be adapted for existing or new facilities.
