-
The
dilution water can be clean
or filtered process water.
-
A
low water flow switch is
standard on all feeders. It stops the metering
pump whenever the water flow drops below minimum.
The pump is automatically restarted when adequate
water flow resumes.
-
A
translucent sight tube allows
the operator to see how the mixer is operating.
-
The
external injection valve is
accessible without disturbing the mixing apparatus.
-
Motor-less
mixing injects the
polymer into the water stream and immediately makes
the solution flow through a high velocity static mixer.
-
It's
designed to be maintenance
free. All components
are modular and
easy to access. There are no parts to wear out
and no mixer motors to
burn out.
-
A
water strainer is
standard with each mixer. The strainer collects
debris that may clog the flowmeter or other components.
-
A
pump calibration cylinder is
standard with each mixer. The cylinder is prepiped
with isolation valves to allow checking the metering
pump flow rate.
STANDARD
FEATURES
-
Polymer
feed capacities of 2.5 to 840 GPD (0.4 to 133 l/h).
-
Dilution
water capacities of 30 to 3600 GPH (115 to 13600 l/h).
-
Motorless
mixing system.
-
Dilution
water pressure range capacity of 25 to 100 psi (1.7
to 6.8 bar).
-
Polymer
pump stops when water flow drops below minimum.
-
Pump
calibration cylinder system.
-
All
components, including the injection valve, are easily
accessed.
-
Compact,
most units are 24"W x 30"H x 18"D (61cm
x 76 cm x 46 cm).
-
Lightweight,
most units weigh less than 90 lbs (41 kg).
-
Electrical
service: 120/240 VAC; 50/60 Hz; less than 600 watts.
SERIES
3000PC STANDARD MODELS
|
MODEL
NUMBER
|
POLYMER
FLOW
GPD
(L/H)
|
WATER
FLOW
GPH
(L/H)
|
|
3048PC-X
|
2.5 to 48 GPD (0.4 to 7.6 L/H)
|
30 to 300 GPH (115 to 1140 L/H)
|
|
3190PC-T
|
10 to 190 GPD (1.6 to 33 L/H)
|
90 to 1200 GPH (340 to 4500
L/H)
|
|
3420PC-V
|
40
to 420 GPD (6.3 to 66 L/H)
|
120
to 1800 GPH (450 to 6800 L/H)
|
|
3840PC-W
|
80 to 840 GPD (13 - 133
L/H)
|
180
to 3600 GPH (700 - 13600 L/H)
|
OPTIONS:
"G"
- Pump speed controlled by dilution water flow. Maintains
solution concentration.
"J"
- Solenoid water control valve.
"T"
- Dilution water flow of 90 to 1200 GPH ( 340 to 4500
l/h ).
"V"
- Dilution water flow of 120 to 1800 GPH ( 450 to 6800
l/h ).
"W"
- Dilution water flow of 180 to 3600 GPH ( 700 to 24000
l/h ).
Polymer
low-flow switch.
Other
voltages.
Custom
modified to meet your needs.
