Croatia Water-In-Water Type High Viscosity Polyacrylamide for Sugar Factory Wastewater Treatment

Apr 20, 2016 · Values of %η magnitude as high as 95 and 98% have also been recorded in the presence of 250 ppm CMC (in combination with 25 and 50 ppm Zn 2+, respectively) for aluminuim and carbon steel substrates in ground water using chemical and electrochemical techniques at pH 11 (Kalaivania et al., 2013, Manimaran et al., 2013).

Sludge bulking is a worldwide problem existing extensively [1] [2][3] in the operation of the waste water treatment plants (WWTPs), which makes it difficult for the separation of sludge from ...

1. It is mainly used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs. 2. It can also be used to treat waste water from textile industry and dye houses, pigment industry, printing ink industry and paper industry. 3.

5. Can be used for the treatment of dyeing wastewater, wastewater, oily wastewater, the turbidity removal, decolorization, to achieve discharge standards. 6. In phosphoric acid purification, separation helps gypsum wet phosphoric acid process. 7. Used in water treatment flocculant rivers of water tap water factory. Packing:

ease the viscosity of water and improve the effectiveness of the water flooding process. 9: Chemical mudding agent: as chemical mudding agent for plugging water of dikes, ground foundation, channels and the like. 10: Industrial Wastewater Treatment: Dosing polyacrylamide can reduce the consumption of coagulant and speed up sedimentation. 11

Dec 02, 2019 · Treatment process. The coal washing water is first collected into the regulating tank. The sewage from the regulating pool is lifted by the pump, and a coagulant mixer is set on the pipeline behind the pump. Before and after the coagulant mixer, coagulant aids and coagulants are added respectively, and then it enters the purifier.